多支点柔性转子系统临界转速稳健设计方法

基于响应面法和容差模型提出了定量考虑参数变差影响的转子系统临界转速稳健设计方法。该方法利用响应面模型获得多参数、多目标之间的函数关系,并以多阶临界转速分布为约束条件、以临界转速对支承刚度变差敏感度最低为设计目标。对小涵道比涡扇发动机低压转子系统临界转速稳健设计结果表明:在考虑各支点支承刚度变差情况下,采用多参数、多目标稳健设计方法,可保证多支点柔性转子系统的临界转速特性在满足设计要求的同时,转子系统临界转速对支承刚度变差的敏感度最低,验证了该方法的有效性。      

航空发动机双转子系统“临界跟随”现象的机理及影响

为了探明“临界跟随”现象导致航空发动机振动居高不下的产生机理,建立了考虑中介轴承的双转子动力学模型,推导了双转子发生“临界跟随”现象时参数之间的关系,分析了“临界跟随”状态下转子系统的动力学特性。结果表明:“临界跟随”现象会导致转子系统无法越过盘偏摆振型临界转速,造成转子振动对不平衡质量分布极其敏感,其主要影响因素为盘极转动惯量与直径转动惯量的比值(简称惯量比)以及双转子增速比；当高压盘等效惯量比等于1,或增速比与任意低压盘惯量比相等时,转子系统表现出高压激励条件下的“临界跟随”特征；当低压盘惯量比等于1,或增速比与高压盘等效惯量比的乘积等于1时,转子系统表现出低压激励条件下的“临界跟随”特征。提出了必须严格控制航空发动机叶盘的等效惯量比以及双转子转速控制律的设计建议。      

基于数字孪生的智能脉动管控

为提升飞机总装脉动生产线智能化水平,开展了基于数字孪生的智能脉动管控研究。基于数字孪生五维模型理论构建了飞机总装脉动生产线数字孪生应用架构,从反应式计划调度、物流精准配送、智能作业指导、产线健康监视、资源迭代优化配置5个方面开展了技术研究,为复杂产品装配的智能制造应用提供参考。     

工艺模型驱动的物料动态精准配送技术

针对飞机装配车间传统“领料式”物料配送存在的弊端,提出了一种工艺模型驱动的物料动态精准配送方法,构建了飞机装配车间物料精准配送管理系统,阐述了系统构建涉及的关键技术难点,采用基于模型的三维可视化消耗式BOM重构方式,建立与设计了模型动态同步精准的MBOM工艺模型,利用RFID技术的优点实时获取物料信息,通过iGPS系统引导AGV物料运输平台来实现装配站位物料的高精度配送。     

Numerical study of traveling ionosphere disturbances with vertical incidence data

High frequency ionosphere vertical sounding, as an important and representative application for detecting the ionosphere and studying the characteristics of radio propagation, can be utilized to monitor the ionosphere continuously variation and to acquire the ionosphere asymmetrical features of diverse scale above the ionosphere vertical sounding stations. This is a first article on real time application of numerical methods to obtain the parameters of traveling ionosphere disturbances (TIDs) using vertical incident ionograms. In this paper, the distribution of ionosphere electron density with TIDs is constructed using a background ionosphere model superimposed a perturbation theory model. The background ionosphere electron density is modelled by the inversion of vertical incident ionograms which are observed before the appearance of the disturbance. Based on the fourth order Adams-Bashforth-Moulton (the so-called ABM) predictor corrector method, instead of Runge-Kutta method, the fast digital ray tracing method is established. According to process of the disturbed trace simulation and parameters inversion, the characteristic parameters of ionosphere disturbance at different detection time can be obtained in real time. The numerical analysis of TIDs is then captured completely.     

基于连续损伤模型的复合材料波纹梁压溃分析

复合材料的耐撞性受到了广泛重视,而波纹梁因其优异的抗屈曲构型被广泛应用于飞机翼梁和直升机底板等经常发生碰撞的结构中。进行了复合材料波纹梁的屈曲分析,研究了高度对波纹梁破坏模式的影响。建立复合材料波纹梁的连续损伤单波模型,层内基于Hashin判据建立含损伤因子的损伤刚度矩阵,层间根据二次名义应力准则和B-K准则模拟损伤演化,并通过典型复合材料波纹梁压溃试验验证了所建立模型的正确性。基于单波分析模型,通过施加周期性边界条件和反对称边界条件,研究了多波结构的吸能特性。     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行（retrograde）地球静止轨道（geostationary Earth orbit, GEO），该轨道与GEO轨道高度相同或相近，但倾角为180°，安装在retro-GEO卫星上的巡视器可每12h对GEO带空间资产附近碎片环境安全预警。直接西向发射retro-GEO卫星存在地面测控和发射能耗较大的困难。基于平面四体模型，为降低设计变量敏感性，以近月点参数为设计变量，建立了部署retro-GEO巡视器的月球借力飞行轨道设计模型，利用轨道动力学模型延拓策略，得到该类轨道绕月后返回地球飞行时长只能约为114.79h，该结论可用于求解该类轨道高精度轨道动力学模型解。     

Mapping mean lake surface from satellite altimetry and GPS kinematic surveys

Lake water height is a key variable in water cycle and climate change studies, which is achievable using satellite altimetry constellation. A method based on data processing of altimetry from several satellites has been developed to interpolate mean lake surface (MLS) over a set of 22 big lakes distributed on the Earth. It has been applied on nadir radar altimeters in Low Resolution Mode (LRM: Jason-3, Saral/AltiKa, CryoSat-2) in Synthetic Aperture Radar (SAR) mode (Sentinel-3A), and in SAR interferometric (SARin) mode (CryoSat-2), and on laser altimetry (ICESat). Validation of the method has been performed using a set of kinematic GPS height profiles from 18 field campaigns over the lake Issykkul, by comparison of altimetry’s height at crossover points for the other lakes and using the laser altimetry on ICESat-2 mission. The precision reached ranges from 3 to 7 cm RMS (Root Mean Square) depending on the lakes. Currently, lake water level inferred from satellite altimetry is provided with respect to an ellipsoid. Ellipsoidal heights are converted into orthométric heights using geoid models interpolated along the satellite tracks. These global geoid models were inferred from geodetic satellite missions coupled with absolute and regional anomaly gravity data sets spread over the Earth. However, the spatial resolution of the current geoid models does not allow capturing short wavelength undulations that may reach decimeters in mountaineering regions or for rift lakes (Baikal, Issykkul, Malawi, Tanganika). We interpolate in this work the geoid height anomalies with three recent geoid models, the EGM2008, XGM2016 and EIGEN-6C4d, and compare them with the Mean Surface of 22 lakes calculated using satellite altimetry. Assuming that MLS mimics the local undulations of the geoid, our study shows that over a large set of lakes (in East Africa, Andean mountain and Central Asia), short wavelength undulations of the geoid in poorly sampled areas can be derived using satellite altimetry. The models used in this study present very similar geographical patterns when compared to MLS. The precision of the models largely depends on the location of the lakes and is about 18 cm, in average over the Earth. MLS can serve as a validation dataset for any future geoid model. It will also be useful for validation of the future mission SWOT (Surface Water and Ocean Topography) which will measure and map water heights over the lakes with a high horizontal resolution of 250 by 250 m.     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Application of a modified generalized sail model on a solar sail with wrinkles

In this paper, we present an analysis of effect of wrinkles on the solar sail performance. We describe different analytical, semi-analytical and numerical approaches to the calculation of general large-scale curvature of a solar sail as well as parameters of so-called wrinkled domains, and introduce the impact of such wrinkles on the thrust and torque of the solar sail. Finally, we present a model of an optically-orthotropic surface for such non-ideal sail, providing a connection with the Generalized Sail Model, and other solar sail thrust models.